BEAUTY DEVICE Paraffin Warmer YM8006

Name: Paraffin Warmer YM8006
Brand: BEAUTY DEVICE
SKU: 34364
Price: 4606 RSD
Availability: InStock
Rating: 5 (1 reviews)

| Write a comment

Paraffin bath is created for heating and preparation of paraffin. Paraffin treatment efficiently opens up the pores and relaxes the muscles.
After the completed paraffin treatment, result is hydrated skin and accelerated circulation.
Paraffin heating container is made out of aluminium. Contains grid for seperating the sludge and preventing direct contact of
client's skin and the device

Technical characteristics:

Power: 265 W;
Working mode: AC 220-240 V, 50 Hz;
Maximum melting temperature: 75° C;
Minimum melting temperature: 60° C;
Required paraffin amount: 2,3 l;
Device dimensions: 360 x 240 x 180 mm;
Interior of the device is coated with aluminum.

Kit content:

Warmer YM8006,
Paraffin brush;
Lattice;
Protective cover.

Show less

Place the appliance on a stable, heat-resistant surface. Open the lid;
Unpack the paraffin and place in the heater up to the "MAX" mark. Install the cover;
Connect the appliance to the mains. Turn the switch to position "1" and heat the paraffin;
Paraffin cannot be used until it is completely dissolved;
Wash your hands and feet thoroughly, take off all jewelry and raise your sleeves. To achieve the best results, the legs and arms can be massaged with a moisturizing cream to speed up circulation and relax that part of the body;
Do not use non-heat resistant preparations;
Before use, check that the temperature suits the client;
Slowly dip your hand or foot into the paraffin to the wrist and then pull out. Wait until the paraffin has set;
Repeat the process 5 times or more for better results. The thicker the layer of paraffin, the longer the heat will last;
Wrap your hands or feet in foil. A better effect is achieved if the hand or foot is additionally wrapped in cotton gloves;
After 20 minutes (the time can be extended if the paraffin layer is thicker and if cotton gloves are used), remove the gloves and foil from the hands or feet and slowly remove the paraffin from the skin. Discard used paraffin, because dead cells remain on the paraffin and it is not recommended to use it again;
When the paraffin is used up and the level is below the ”MIN” mark, add the appropriate amount of paraffin to the melter to keep the level between the ”MIN” and ”MAX” marks;
Switch off the appliance and unplug it. Wait until the rest of the paraffin has set and remove the appliance. It is recommended to clean the appliance regularly.